Overview

Osmo Polyx Hard Wax Oil Rapid is available in either matt or satin finishes and ideal for use on interior wooden floors and furniture. The use of natural oils and waxes enhances the wood's natural character whilst protecting your interior wood without cracking, peeling, or flaking. It's been formulated to be fast drying and be dry in as little as 4-5 hours. Along with easy application and no need for primer this really is the go-to product for wooden floors and furniture.

Extremely durable and hard wearing
Does not crack, peel or flake
Resistant to household spillages e.g. juice, tea, and wine
Enhances the wood’s natural character

Tinted Colour Information

Tinted paint is custom mixed in house at Next Day Paint using our Osmo tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.

Area	Interior
Recommended Use	Interior wooden floors and furniture
Base	Oil-Based
Drying Time	4-5 Hours
Re-Coat Time	4-5 Hours
Recommended Coats	2 Coats
Application Method	Brush, Roller
VOC Levels	High

Preparation

Always ensure the surface is clean and free from dust, debris and frost.

Clean old microporous stains (wood oils).
Old paints and lacquers must be completely removed this can be done by sanding back or using a suitable chemical stripper.
Fill any cracks with an appropriate wood filler, for larger joints and holes use .
Sand the surface carefully, starting with a coarse sandpaper and finish fine grade, for flooring 120-150, for furniture 180-240.
Before application ensure all dust has been removed.

Application

Always test a small area of the surface to be treated before application to ensure you are happy with the finished look.

Stir well before use.
Osmo Polyx Oil is ready to use and does not require thinning.
Use a , floor brush or microfibre roller.
Apply thinly working in the direction of the wood grain and spread well.
Allow to dry for 4-5 hours under good ventilation.
After drying quickly apply a second coat.
If re-coating one coat should be sufficient.
Avoid covering during drying and curing, after 2-3 weeks the surface will be fully cured.

Note: Always follow the manufacturer's instructions found on the tin.

Aftercare & Storage

Cleaning

Clean the surface regularly with a duster or vacuum, for spillages and a more intensive clean use with a damp mop. Avoid over saturating the surface with water. For furniture use the .